UAB Lielbata

Home address: Liepų g. 83, Klaipėda 92195, Lietuva

Phone/fax : +37061230036

E-mail : info@ltactic.lt

Website: www.ltactic.lt

General information about the company:
„LTACTIC” MANUFACTURES AND TRADES IN ballistic helmets, safety glasses, tactical and protective gloves, clothing, accouterments, holsters, and backpacks.The range of products is for spec. services, the army, and the civilians.

 

 

BULLETPROOF HELMET TOR E

PURPOSE

It is intended for individual protection of the military and law-enforcement employees from traumas and wounds, and for installing special equipment.

Provides the head protection at falling or hitting, under impact of an explosive wave, small fragments and ricochets, under a hit of pistol bullets and other small-arms bullets spent.

 

 PROTECTION STARDARDS

Class 1A (Stechkin APS) according to ISTU (Industry standards of Ukraine) 78-41-004-97

NIJ STD 0106.01 Level IIIA

NATO STANAG 2920 standard is at level V50=695,2 m/s (FSP=1,102 g)
Material of the helmet armor shell (aramid fiber) ensures the product operation for all climate conditions considering the influence of precipitation.

There are waterproof and fire-resistant layers on the outer side of the helmet shell (under the paint).There is anti-glare coating above the paint on the outer side of the helmet shell.

Design of the retention and shock-absorbing system contributes to head passive ventilation.

Compatible with ballistic masks, tactical and correcting glasses, night vision gears, active headphones, various radio headsets, gas mask and respirators.

Operating temperature: from minus 40 to plus 40 degrees Celsius.

Helmet sizes are tuned by adjusting the retention system and the internal location of damper pads.

Bulletproof helmet ТОR-D High Cut

 

TOR-D is the light version of ballistic helmet TOR. Helmet form with special side cutouts provides additional facilities for using active headphones and radio headset.

PURPOSE

It is intended for individual protection of the soldiers of airborne forces and special divisions from traumas and wounds, and for installing special equipment.
Provides the head protection at falling or hitting, under the impact of an explosive wave, small fragments and ricochets, under a hit of pistol bullets and other small-arms bullets spent.

 

PROTECTION STARDARDS

Class 1A (Stechkin APS) according to ISTU (Industry standards of Ukraine) 78-41-004-97

NIJ STD 0106.01 Level IIIA

NATO STANAG 2920 standard is at level V50=695,2 m/s (FSP=1,102 g)

 

Other characteristics:

Material of the helmet armor shell (aramid fiber) ensures the product operation for all climate conditions considering the influence of precipitation.

There are waterproof and fire-resistant layers on the outer side of the helmet shell (under the paint).

There is anti-glare coating above the paint on the outer side of the helmet shell.

Design of the retention and shock-absorbing system contributes to a head passive ventilation.

Compatible with ballistic masks, tactical and correcting glasses, night vision gears, active headphones, various radio headsets, gas mask and respirators.

Helmet sizes are tuned by adjusting the retention system and the internal location of damper pads.

 

 

Side protection block „BSP-V“

 

 

PURPOSE

Designed to increase the area of protection of high cut ballistic helmets, provides additional protection in the ears and neck area from injuries caused by the destruction of shells, mines, hand grenades, and steel arms.

Compliance: ​

Protection against damage by fragments simulators with a typical mass of 1.1 g and a speed of 620-650 m/s from a distance of 5-10 m. (Element of defeat is the simulator A3 / 6723 according to the Annex to STANAG 2920).

 

Technical characteristics:

Sizes (no more than):

lenпth  – 160 mm;

width –140 mm;

thickness – 40 mm

The total area of protection: (no more than) 150 cm2 (75 cm2 on each side)

Weight of the kit: 350 +/- 20 g.

Available in two versions:

Flat (BSP-F);

Volumetric (BSP-V) which allows the use of a radio headset

BSP is mounted on side railings using fastening elements without special tools.

The outer surface of the ballistic plates is smooth, matte and has

an anti-reflective coating.

Provides operation and maintains protective properties in the temperature range from -50C to + 60C.